Flash - speedlight (battery)
46" / 115cm Photek Softlighter ELINCHROM collapsible softbox
Use keywords to find the product you are looking for.
* FAQ & KITS *
Backdrops & Stands->
Bags: studio stand & camera
Beauty dish & ring flash
Cables, radio triggers & remotes
Clamps & brackets
Film & Polaroid->
Filters, gels & diffusers
Flash - ring & portable
Flash - speedlight (battery)
Flash - studio monoblock
Light tents & tables
Reflectors & Scrims
Software & DVDs
Speedlight kits for strobists
Speedlight Snoot Grids & Gobos
Tripods & heads
Photobasics by Westcott
Sanyo - Panasonic
Shirley paper backdrops
Shipping & Returns
Payment & Privacy
Conditions of Use
*Cactus RF60X Radio Control Speedlight master slave flash RF-60X
Click to enlarge
The new RF60X takes speedlights to a new level. 1.9 second recycle time, smart cooling system and an AF assist light. Multi brand radio High Speed Sync (HSS) and power control (via V6ii) are carried over from the original RF60.
The RF60X flash uniquely has a built in Cactus V5/V6 compatible radio transmitter and receiver. It not only receives wireless signals, but it also functions as a commander to control other RF60 flashes. Alternatively the V6 can be used as a commander / master device to control the RF60's power and zoom settings as well as trigger the flash.
Built-in radio commander and receiver
The Cactus RF60X is a 2.4GHz radio-based wireless speedlight flash with a built-in 16 channel transceiver. It operates in three modes, Local for on-camera operation, Master and Slave modes for off-camera. To act as a commander, set an RF60 to Master and it can trigger an unlimited number of RF60s set as receivers in 4 groups up to 100m (328 feet) away.
Remote control of power, zoom & AF assist
An RF60X set to Master mode allows you to remotely control flash power of 4 groups of RF60s set to Slave from 1/128 to 1/1 full power in steps of 0.3EV. Zoom level can also be controlled from a wide 24mm zoom to 105mm. The RF60X's AF assist light can be controlled from a V6ii automatically or manually. The remote control is extremely convenient especially when Slave flash units are placed in hard-to-reach places.
Four groups with configurable group name
In a typical lighting setup, the ability to adjust, activate and deactivate groups of lights is vital in creating the desired lighting effect. The RF60 can be control four distinct groups. Power can be adjusted for individual group or all the groups at the same time for fast adjustments. To streamline the shooting experience, user can name groups: KEY, FILL, SPOT, RIM, HAIR, LEFT, RIGHT, BACK and FRONT instead of remembering the placement of flash groups A, B, C and D.
Intelligent regulation of the RF60X's recycle time ensures the RF60 always runs cool. You can now shoot without the restriction of an overheat cutoff.
Optical Slave with delay feature
The RF60X packs an optical triggering mechanism. It is useful in capturing pre-flash signals that are being emitted earlier than the flash sync. Setting the pre-flash optical trigger with the delay timer sets the exact time for the flash to start firing. This allows the RF60 to do not only first-curtain and second-curtain sync (also referred as front and rear curtain), but set the flash to fire at any given point of the image.
High power : Guide Number of 56 meters
At times when you need it, the RF60X can pumps out an assuring output of GN56. The Fresnel lens was specifically designed to give out the best possible light.
Compatible with Cactus V5 & V6 Wireless Flash Transceivers
Flash power output on RF60 Slave units can be controlled by an RF60 Master as well as Cactus V6 Flash Transceiver. RF60s can also be fired via the Cactus V5 radio triggers.
In Multi mode, a rapid series of flashes is fired to capture multiple images of a moving subject in a single frame. This feature is available in all three flash modes so it users can create the desired effects with both on and off camera flash.
HSS Sympathy mode
The HSS Sympathy mode of the RF60 is designed to support flash photography at shutter speeds beyond a camera’s maximum sync speed. With the help of a TTL flash mounted on camera, RF60 can flash with an extended duration in order to produce even frame illumination at shutter speeds as high as 1/8000 second.
The RF60 is meant for use in a multiple flash setup and was designed with the needs from professional photographers in mind.
Whether it’s a wedding or commercial shoot, timing is crucial. RF60 users will not only find adjustments quick and easy, the LCD also displays necessary information photographer needs to know. All in all, it offers an intuitive flash photography experience. So you, as the photographer, do not need to fiddle with the gear but instead enjoy the shooting experience.
Guide Number : 56m / 183 feet @ ISO 100
Zoom range : 24-105mm plus wide angle diffuser
Power levels : 22 in 1/3 stops down to 1/128
Minimum flash duration: 1/20,000s
Modes: Master, Slave & Local
Radio system: 2.4GHz, 16 channels, 4 groups
Wireless range: 100 meters (328 feet)
Metal hotshoe and 3.5mm sync ports
Canon type external battery pack connection
1/4" threaded socket on side for stand / bracket mounting
USB port for firmware updates - link at bottom of this page
Optical slave modes: S1 (straight triggering) & S2 (pre-flash ignore triggering)
Power input: 4 AA batteries. Supports external battery pack
Smart cooling system
Color temperature: 5600k +/- 200k
Operating temperature: -20°C to +50°C
Dimensions: 205 x 83 x 61mm
Net weight: 390g
Included items :
Flash RF60 x1;
Flash Stand FS-2 x1
Carrying Case FC-3 x1
English User Manual x1
Firmware update for Mac and Windows - link below :
For more information, please visit this products
This product was added to our catalog on Thursday 04 January, 2018.
1104 - The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET MAX_JOIN_SIZE=# if the SELECT is okay
select p.products_id, p.products_image from orders_products opa, orders_products opb, orders o, products p where opa.products_id = '1460' and opa.orders_id = opb.orders_id and opb.products_id != '1460' and opb.products_id = p.products_id and opb.orders_id = o.orders_id and p.products_status = '1' group by p.products_id order by o.date_purchased desc limit 10