This Lumoz Wall arm allows secure mounting of flash, LED or fluorescent continuous lights.Length : 100-175cmLight fitting : reversible 5/8" / 16mm spigot with 1/4" and 3/8" threaded endsSwivels left & right approximately 150 degreesSupports up to..

The Lumoz Atom Clamp can be used as a mini super clamp, for loads up to 5kg, despite weighing just 150g. The jaws open 4cm wide allowing the Atom Clamp to grip a wide range of stands and fixtures. Commonly used to mount monitors, LEDs, speedlight fla..

This is a set of 4 metal clamps designed for attaching backdrops to backdrop stands or other poles. They are not needed for attaching our 3x6m muslin backgrounds to the backdrop stands we sell as the muslins have a rod pocket, but can be handy if you..

This is a pair of 2 metal clamps ideal for use with paper backdrops to stop them unrolling when on a backdrop stand They have many other uses in the studio such as holding cutters, gobos etc Specifications: Jaws are rubber padded and ope..

This is a pair of 2 extra strong metal clamps ideal for use with paper backdrops to stop them unrolling when on a backdrop stand They have many other uses in the studio such as holding cutters, gobos etc Specifications: Jaws are rubber p..

This handy G Croc clamp is just what you need for attaching pop up backdrops, gels and much more to light stands or other poles. The jaws have heavy rubber padding to protect the item being clamped and provide better grip. Curved jaws open 3.5cm..

This handy kit will hold a pop up backdrop up to 2.7m from the floor, making it easy to have it well above head heightIncluded items1x 2.75m sturdy air cushioned stand1x pop up backdrop clamp Pop up backdrop and not included. Sandbag recommended..

Super clamps are widely used for many different jobs due to their impressive 15kg capacity. A male-male spigot is included which allows joining two super clamps together so you can then join two poles at any angle. Sturdy alloy construction wit..

The Slidecam 1000 slider makes smooth camera movements easy. The rail is a generous 1m long while the slider features four ball bearing wheels for the smoothest action. **** NEW MODEL IN STORE WITH SWIVEL LEGS- IMAGES COMING SOON**** There a..

This spigot is a replacement for the one found in our $49.95 Lumoz metal umbrella brackets. Not guaranteed to fit any other bracket. The outside diameter is the standard 5/8" / 16mm width and it has the industry standard 1/4"threaded studs...

This spigot has many uses including mounting lights to an IMAGE Melbourne C stand. The outside diameter is the standard 5/8" / 16mm width and it has the industry standard 1/4" and 3/8" threaded studs...

This spigot is a replacement for the one found in our chunky metal umbrella brackets, but has 101 other uses. The outside diameter is the standard 5/8" / 16mm width and it has the industry standard 1/4" and 3/8" threaded studs...

This 3 way speedlight sync splitter allows mounting 3 speedlights to a bracket and triggering all 3 flashes with a single trigger. There is circuitry built in which prevents reverse voltage being fed from one flash into another. The unit includes ..

This hotshoe mount (properly called a coldshoe mount as it has no electronics) is a great way of mounting your flash to anything with a standard 1/4" thread such as most : Light stands Tripods Clamps Ball heads Umbrella brackets Features..

These handy ball bungees are just what you need for attaching all sorts of gear just about any stand, rod, pole or hook, buy as few or as many as you need.Included items 1x Ball bungee tie down Specifications Ball is approximately 25mm (o..

Ball bungee tie downThese handy ball bungees are just what you need for attaching all sorts of gear just about any stand, rod, pole or hook, buy as few or as many as you need.Included items20x Ball bungee tie downsSpecificationsBall is approximately ..

This study bracket allows mounting a single speedlight to your Bowens mount softbox or other studio accessories. Suits our QikBox and most other softboxes.Will also accept larger flashes like the Visico2 & Godox AD200, as well as speedlight flas..

This Lumoz ceiling / wall arm allows secure mounting of flash, LED or fluorescent continuous lights.Length : 33cm - 55cm (13" - 22")Plate size : 9 x 12.5cmCapacity : 10kgLight fitting : reversible 5/8" / 16mm spigot with 1/4" and 3/8" threaded ends..

This Lumoz ceiling / wall arm allows secure mounting of flash, LED or fluorescent continuous lights.Length : 16cm / 6.5"Plate size : 9 x 12.5cmCapacity : 10kgLight fitting : standard 5/8" / 16mm spigot..

This handy croc clamp is just what you need for attaching all sorts of studio gear to poles or flat surfaces such as bookcases & tables. The jaws have heavy rubber padding to protect the item being clamped and provide better grip. The clamp is fit..

The Lumoz Double Ball Arm can be used to hold loads up to 2kg despite weighing just 100g. A single knob locks and unlocks both heads for quick adjustment. Commonly used to mount monitors, LEDs, speedlight flashes and small size cameras Makes a gre..

This spigot is designed for mounting lights to an IMAGE MELBOURNE backdrop stand or tripod legs. The outside diameter is the standard 5/8" / 16mm width and it has 1/4" and m10 threaded sockets, also fits 3/8" studs. May not suit other brands of..

This heavy duty friction arm makes positioning your SLR, video or point and shoot camera easy. Also great for LED lights or speedlight flashes. The ball heads lock down firmly allowing a wide range of uses. Mounting methods : The base comes w..

This handy G clamp is just what you need for attaching all sorts of studio gear to poles or flat surfaces such as bookcases & tables. The jaws have heavy rubber padding to protect the item being clamped and provide better grip. The clamp is fitted..

This coldshoe mount attaches to all standard hotshoes and provides a 1/4" threaded post for mounting accessories such as speedlight flashes, LED lights, monitors, brackets etc. It has two screw down collars to ensure secure mounting of both the hotsh..