6.5m x 3m Backdrop Stand for 6m wide muslin backgrounds

These stands are very sturdy - the clamps, brackets & poles are metal and withstand people stepping on the muslin too close to the stand very well. Even the knobs are metal!

These extra tall Lumoz stands are great for use with 6m wide muslin or poly velvet backdrops, and can also be used with vinyl and other fabrics. For use with 2 roll backdrops like paper we recommend our colour matched gaffer tape to close the gap.

The stands adjust from 1.0 to 3m high and are air cushioned. These also make great light stands as they have the appropriate spigot built in.

The top bar has an all metal click together cam-lock system which does not require tools. There is nothing worse than loosing the vital hex key needed for the cheaper stands 5 minutes before a shoot!

Each of the top bar sections is 0.95m* long and it can be assembled from 2.8 to 6.6m lengths approx in 95cm steps. The top bar is smooth when assembled (unlike a tube in tube design which means the bars are uneven diameters leading to ripples in the backdrop)

There are 2 carry bags, each is divided into three sections - a padded compartment for each stand and the centre section has 3 elastic loops at each end to hold the top rods. It is sturdily constructed and approximately 1m long so easily fits in even a small car boot.

Included Items

• Three 3m high stands, air cushioned
• Seven cam lock top tube sections 0.95m* long - assembles from 1.9 to 6.6m wide
• Two sturdy bags which hold the stands in separate padded sections and have elastic ties for the top tubes

Other items such as the muslin backdrop are for illustration only and may be purchased separately