Cactus V6/V5 Shutter Cable- Canon 1D 5D 6D 7D 50D 1V 3 D60

This cable allows you to use your Cactus V6 or V5 Wireless Flash Transceiver as a wireless shutter release device! A shutter release cable is an ideal device to prevent camera shake when you press the shutter release button. It is a must for night photography or taking photos in Bulb mode.

Simply connect the coiled shutter cable from your camera’s remote control terminal to the V5 transceiver X-Sync Port, and you can wirelessly control the shutter of your camera. To use the V5s as a flash trigger and camera trigger simultaneously you must have two complete sets of V5 transceivers set on a different channels. This means you are running the shutter release and wireless flash systems in parallel, so a total of 4 V5s is needed to perform both functions simultaneously. Neither set should be set on channel 1 as flash and shutter must be triggered at different times.
Grab a shutter release cable today to enjoy the ultimate flexibility and freedom in wireless flash photography!

Specifications:

Shutter Release Cable for Canon DSLR cameras below :
1Ds, 1Ds Mark II, 1Ds Mark III, 1D Mark IV, 1D Mark III, 1D Mark II N, 1D Mark II, 1D
5D Mark III, 5D Mark II, 5D
6D
7D
50D, 40D, 30D, 20D, 20Da, 10D
D30, D60
1V, 3

The 3.5mm stereo plug connects to the V5 X-Sync Port while the other end connects to the remote control terminal on the camera.

Length of cable: 26cm, extends to around 60cm
Designed to work with Cactus V6 or V5 triggers, NOT guaranteed compatible with any other trigger. NOT compatible with Cactus V4.